because I will not skate GCs and I came into this second set of COs at a very cheap price also I love the way they skate and think they are a great frame just not durable whatsoever my first pair lasted less than a month and these only lasted less than an hour.
Posted by: PunkRawk601
프레임 자체는 맘에 드는데 처음에 썼던 CO 프레임은 한달도 못 갔고, 두번째 CO 프레임은 1시간도 못 가서 깨졌다고 -_-
어디가 깨졌냐고 물어보는 질문에...
the axle where the 2nd wheel is broke off
2번째 휠 근처가 깨졌다고
funny, i used to talk all kinds of shit about CO because so many people were breaking the first gens (i think like pretty much everyone who bought the blacks broke them before they were even grooved) but i got a large set of the new green ones just to give them a shot, and so far they are my favorite frames and they are holding up to my skating which can be pretty damn harsh.
i dont ride with inserts or shields in them cause thats not what i bought them for and personally i dont want extra parts on my frames. plus i had to swap out the bolts with cround control because CO bolts are the worst i have ever used in my life but aside from that i love them and am very impressed with how they skate.
they could be more solid for sure though, i think they need to do away with the whole graphic insert idea and focus on serious hardgoods.
most stuff works, just dont use the stock hardware your setting yourself up for a fail. they get stuck passing through bearings, the threads match up loose as hell, and some dont stay together at all, and they round out after the first installation. pretty much everything you dont want in an axel bolt.
Posted by: joshdamnit
다른 분 댓글. 1세대 CO 프레임 박살 얘기는 많이 들었지만 새로 나온 모델(녹색)은 잘 타고 있다고...
단, CO 프레임의 액슬(?)은 써본 것중에 최악이라고. 베어링 중간(?)에 걸리고, 잘 풀리고, 처음에 조일 때 나사 구멍이 뭉개졌다고... ㅋ
I was skating them 3 down with 2 in the front and one in the back and they broke in the front had the Gblock in the third slot.
I have never had any problem with the hardware one the frames just the frames being way brittle. Wish I could switch that around. And I dont expect it to be perfect I got the first molds and broke em then waited for the 2nd batch and the same thing in the same place on the frame happened.
they replace my first set an I sold them cause I wanted to wait for the second gen so I did and now they broke so maybe they will replace them too
Posted by: PunkRawk601
앞쪽에 주행용 휠 2개, 뒤쪽에는 G블럭이랑 휠 1개 (바퀴 3개짜리) 셋업으로 탔는데 앞쪽이 깨졌다고.... // CO 프레임은 플랫 셋업으로 타라는 알바스러운 댓글에 대한 답변인 듯 -_-
이 친구는 액슬 문제는 없었고, 프레임이 잘 깨지는 것만 아쉬운 듯.
1세대 프레임을 깨먹어서 (CO에서 교환해 준 1세대 프레임은 다른 사람에게 팔고... -_-;;;;;;;;;;;;;;;;)
나중에 나온 2세대 프레임을 사서 썼는데, 똑같은 부분이 또 깨졌다고... -_-;;;;;;;;;;;
Posted by: PunkRawk601
프레임 자체는 맘에 드는데 처음에 썼던 CO 프레임은 한달도 못 갔고, 두번째 CO 프레임은 1시간도 못 가서 깨졌다고 -_-
어디가 깨졌냐고 물어보는 질문에...
the axle where the 2nd wheel is broke off
2번째 휠 근처가 깨졌다고
funny, i used to talk all kinds of shit about CO because so many people were breaking the first gens (i think like pretty much everyone who bought the blacks broke them before they were even grooved) but i got a large set of the new green ones just to give them a shot, and so far they are my favorite frames and they are holding up to my skating which can be pretty damn harsh.
i dont ride with inserts or shields in them cause thats not what i bought them for and personally i dont want extra parts on my frames. plus i had to swap out the bolts with cround control because CO bolts are the worst i have ever used in my life but aside from that i love them and am very impressed with how they skate.
they could be more solid for sure though, i think they need to do away with the whole graphic insert idea and focus on serious hardgoods.
most stuff works, just dont use the stock hardware your setting yourself up for a fail. they get stuck passing through bearings, the threads match up loose as hell, and some dont stay together at all, and they round out after the first installation. pretty much everything you dont want in an axel bolt.
Posted by: joshdamnit
다른 분 댓글. 1세대 CO 프레임 박살 얘기는 많이 들었지만 새로 나온 모델(녹색)은 잘 타고 있다고...
단, CO 프레임의 액슬(?)은 써본 것중에 최악이라고. 베어링 중간(?)에 걸리고, 잘 풀리고, 처음에 조일 때 나사 구멍이 뭉개졌다고... ㅋ
I was skating them 3 down with 2 in the front and one in the back and they broke in the front had the Gblock in the third slot.
I have never had any problem with the hardware one the frames just the frames being way brittle. Wish I could switch that around. And I dont expect it to be perfect I got the first molds and broke em then waited for the 2nd batch and the same thing in the same place on the frame happened.
they replace my first set an I sold them cause I wanted to wait for the second gen so I did and now they broke so maybe they will replace them too
Posted by: PunkRawk601
앞쪽에 주행용 휠 2개, 뒤쪽에는 G블럭이랑 휠 1개 (바퀴 3개짜리) 셋업으로 탔는데 앞쪽이 깨졌다고.... // CO 프레임은 플랫 셋업으로 타라는 알바스러운 댓글에 대한 답변인 듯 -_-
이 친구는 액슬 문제는 없었고, 프레임이 잘 깨지는 것만 아쉬운 듯.
1세대 프레임을 깨먹어서 (CO에서 교환해 준 1세대 프레임은 다른 사람에게 팔고... -_-;;;;;;;;;;;;;;;;)
나중에 나온 2세대 프레임을 사서 썼는데, 똑같은 부분이 또 깨졌다고... -_-;;;;;;;;;;;
덧글
프래임 재질 고무로 만들어야 할기세 ㄷㄷㄷ
진짜 프래임 사용기가 아니라 프래임 사망기가 줄줄히 터져나오네요 ..
이거 월드 워런티 적용됨?
그런데 저라면 안 깨먹을듯 .. 나만큼만 타면 안깨질듯 ..헐 .. )
그것보다도 살로몬 구형 프래임 있죠? 막 휠 위치 변경되는거 ㅋ
그거 돌에서 타면 하루만에 개작살 남요 ㄷㄷㄷㄷㄷㄷㄷ
로얄 연습하느라 그루브가 엉터리로 나기는 했어도.... ㅋ;;;
GC 옆 판떼기 잘 깨지는 프레임도
난 안 깨먹고 잘 쓰고 있음. ㅋ;;;;