google_ad_336x280_2개_하단


Six Won Six 레이저(Razors) SL Plates // UHMW, 소울 플레이트(Soul Plate) Sk8s / 어그레시브 인라인



Brand new Six Won Six Razors SL Plates in the house! These are for Razor SL (Dre 2, Horn, Aragon 4, Icon 2, Aragon 3) Style skates. This part would go in place of the Razors Slider Grindplates. They are sold in a SET, so enough for your right and left skate. These are machined out of a solid block of UHMW (Ultra-high-molecular-weight polyethylene), i explain in depth what UHMW is below. but pretty much UHMW is the hardest, longest lasting plastic out there, these souls will last you at least twice as long as your regular Razors Slider Grindplates. Be sure to check out some of the extra pictures and info below:





What is UHMW?

“Ultra-high-molecular-weight polyethylene or sometimes shortened to UHMW, is a subset of the thermoplastic polyethylene. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made. It is highly resistant to corrosive chemicals with exception of oxidizing acids; has extremely low moisture absorption and a very low coefficient of friction; is self-lubricating; and is highly resistant to abrasion, in some forms being 15 times more resistant to abrasion than carbon steel. Its coefficient of friction is significantly lower than that of nylon and acetal, and is comparable to that of polytetrafluoroethylene (Teflon), but UHMW has better abrasion resistance than PTFE (Teflon), It is odorless, tasteless, and nontoxic.”

- Taken from www.wikipedia.org





Check out the picture below: You’ll notice that there are concave dimples spread across the soul, what these do is they reduce the amount of surface area touching while grinding. So what ends up happening is it helps you slide faster, and also wax will build up in these concave dimples, increasing your grind speed.





If you haven’t yet checked out the Six Won Six website and facebook page, check out the links below and give them a like on facebook.

http://www.facebook.com/sixwonsix

http://www.sixwonsix.com/



Thanks and stay tuned to the Rollerwarehouse Blog to keep up on the newest and freshest product.



UHMW의 단점이라면...

그라인드를 할 때 너무 미끄럽다 -.-;; 라는 것과

잘 닳아지지 않는 건 맞지만 뭉개진다는 점이... // 카이저 다이아몬드 프레임은 액슬 구멍이 옆으로 쭈~욱 늘어진다거나.. 그러다가 찢어지곤 했음. ㄷㄷㄷ


요 솔판은 (사진으로 보기에는) 쉘 옆면의 구멍에 끼워지는 돌기도 안 만든 듯!? -.-;;;;;;;




덧글

  • faaeee 2012/04/15 02:34 #

    그라인드 할때 미끄럽데요??

    전에 나이츠 솔판도 이 재질이었는데 엄청 먹었었어요 으잌ㅋ

    그 돌에 떠서 가는듯한 그런 느낌을 말하는겅가!?
  • 코코마 2012/04/15 11:53 #

    응응

    물려서 가는 느낌없이 돌이랑 따로 노는 느낌 그거 ㅜㅜ
  • faaeee 2012/04/15 02:36 #

    솔까 이런 수작업 값비싼 타브랜드 호환 부품은 진짜 돈디럴 .. 망한짓 같은데 ..
    저게 진짜 평생 쓸것도 아니고 , 저 정도 금액이면 오리지널 부품 두개머겅 해도 되잖아요?
    그런데
    이상하게 .. 사고 싶단 말입니다 ..
    아 .. SWS 램즈 솔판 예술이던데 .. 한장에 40불 막 이러던데 ㄷㄷㄷ
  • faaeee 2012/04/15 02:37 #

    3번째 클로즈업 사진 보면 표면에 흰색 점점점 저거 선반 가공 작업할때 쓴 절삭유 (마찰없애주는 기름) 자국 같은데 으잌ㅋㅋㅋ
  • 코코마 2012/04/15 11:54 #

    으힠.. 기름자국 ㅋ
※ 로그인 사용자만 덧글을 남길 수 있습니다.